• E-Dent
  • E-Dent

E-Dent 100

EnvisionTEC’s E-Dent 100 is a light-cured micro-hybrid filled dental crown and bridge material for long term temporaries. Provisionals are photo polymerized on a voxel-by-voxel basis (volumetric pixel) of the liquid resin. E-Dent 100 can also be used for printing of very tough veneers that are extremely accurate with a very fine surface finish. E-Dent 100 is currently available in 3 shades A1, A2 and A3. Structures can be cut back and then layered using any light-curable shade composite. It is FDA approved. EnvisionTEC’s E-Dent 100 has been developed especially for the manufacturing of long term crown and bridge provisional. Full crowns or multi unit bridges can be printed. The printed design can also be cut back to allow for color layering and shading.

Key Features
Physical Properties

Filler content by weight in %

49%

Filler content by volume in %

30%

Vickers hardness

25 HV

Flexural Strength

> 90 N/mm2

Modulus of Elasticity

> 4400 N/mm2

Tensile Strength

30 N/mm2

Compressive Strength

> 250 N/mm2

Water Absorption

18.1 μm/mm3

Recommended Machines
Applications