EnvisionTEC’s Perfactory 4 Standard Series with ERM is a low cost, easy maintenance, and user-friendly 3D rapid prototype manufacturing system. Using state-of-the-art Direct Light Projection technology from Texas Instruments®, the P4 Standard Series produces the finest detail in the shortest period of time. It creates 3D models that range from the conceptual to the fully functional.
192 x 120 x 180 or 230 mm (7.6 x 4.7 x 7.09 or 9.06 in.)
100 µm (0.0039 in.)
Dynamic Voxel Resolution in Z (material dependent)**
0.0010” (25 µm) to 0.0059” (150 µm)
1920 x 1200 Pixels
Native Voxel Size
100 µm (0.0039 in.)
Voxel Size With Optional Enhanced Resolution Module
50 µm (0.0020 in.)
1 Year Included
Snap-fit items that require some elasticity
Strong, clear material with flexible capabilities
Prototype and end-use model printing
Flexible, holding high stress and force
A low-wax 3D printing material ideal for professional retail and jewelry customers who require flexibility between large and small pieces
Custom hearing device applications
High temperature molding material for non-metal masters
extremely durable for use in high accuracy parts
A popular casting material, PIC 100 is ideal for printing jewelry, dental and other parts requiring exceptional detail and surface finish
fast design verification models
for robust and durable parts
robust, accurate, and functional parts
for very high resolution tough & stiff parts
A popular value casting material containing 20% powder wax content, allowing for standard wax burnout cycle with most investments
Prototype and end-use model printing
Polyurethane-like resin that 3D prints end-use and prototype parts that compete with injection molded plastics
Als größtes Mitglied der Micro Plus-Familie bietet die Micro Plus XL einen Bauraum von bis zu 754.900 mm3 (46.6 Zoll3) mit einer Auflösung von 82 µm (0.003 Zoll). Durch ihre schnelle Baugeschwindigkeit und der exzellenten Oberflächengüte ist die Micro Plus XL die perfekte Lösung für Anwendungen in Forschung und Produktdesign.
Die Desktop XL Plus bietet einen Bauraum von bis zu 93 cm3 (36.6 in3) bei einer Auflösung von bis zu 36 µm und verbesserter Baugeschwindigkeit. Das macht diesen Drucker zur idealen Lösung für kleine und mittlere Unternehmen, die nach einem flexiblen 3D-Drucksystem suchen.
EnvisionTEC‘s ABS Flex White 3SP is an extremely flexible ABS-like 3D printing material for 3SP technology. ABS Flex White is an ideal solution for a wide variety of applications including snap-fit items and assembly applications which require some elasticity.
ABS Hi-Impact 3SP is a tough material, suitable for high quality prototypes of items in categories such as automotive and consumer goods as well as stable enough for production-quality end use parts.
EnvisionTEC‘s ABS Tough is an extremely tough ABS-like 3D printing material. ABS Tough is an ideal solution for a wide variety of applications including snap-fit items and assembly applications which require some elasticity.
The EnvisionTEC E-Clear series is a liquid photopolymer that produces strong, tough, water-resistant parts especially for applications in the custom hearing device market.
EnvisionTEC’s E-Glass 2.0 material is a transparent material for use on EnvisionTEC's 3D Printers. Featuring excellent surface finish quality and feature resolution, E-Glass 2.0 is an ideal 3D printing solution for simulating clear plastics.
E-Model is a tough material, suitable for high quality prototypes of items in categories such as automotive and consumer goods as well as stable enough for production-quality end use parts. It is also the ideal material for dental and orthodontic models.
E-Rigid PU is a polyurethane-like resin that 3D prints end-use and prototype parts that compete with injection molded plastics. Available in black, natural and white, E-Rigid PU is hard and stiff but also maintains good strength, marked by flexibility and impact resistance. With a hardness value of Shore D 80, the same value as a cast urethane plastic, E-Rigid PU is a versatile and tough material. E-Rigid PU is ideal for end-use and prototype applications that may have previously used ABS, nylon or urethane plastics, such as casings for handheld devices, snap-fit or consumer and sporting goods.
A low-wax 3D printing material, EPIC delivers results similar to EnvisionTEC’s wax-free PIC material, but with 8% liquid wax for lower thermal expansion during burnout. Ideal for customers who require flexibility between large and small pieces and have expert-level quality control in casting.
High temperature molding material for non-metal masters dramatically changes 3D printing capabilities for manufacturers. With a heat deflection temperature of 140°C straight out of the machine, high definition parts printed in HTM140 can be directly vulcanized in rubber, eliminating the need for a metal master.
The latest breakthrough in extremely durable photopolymers for use in producing very accurate parts with high feature detail on EnvisionTEC’s 3D printers. With added stability and surface quality, this material produces parts with high impact resistance similar to thermoplastics.
A popular production casting material, PIC 100 is ideal for printing jewelry, dental and other parts requiring exceptional detail and surface finish. In jewelry, PIC is recommended for pieces up to 5 grams finish weight, such as bridal jewelry.
Accurate and functional resin for producing robust and durable parts. Pro Gray 3D Printer Material is a liquid, photo-reactive acrylate with a wide processing latitude, which is used to produce parts with high quality up-facing and down-facing surfaces.
EnvisionTEC’s quick building QView resin is ideal for providing fast design verification models. This exciting new material is capable of impressive print speeds for the full build envelope. This allows designers to put their custom design pieces into their customers’ hands in record time for final fit and design verification. It can also be used as a pattern when built in high resolution to make a silicone mold.
R5 3D printing material is a liquid photopolymer that produces robust, accurate, and functional parts. Exhibits superior fatigue properties, strong memory retention, and high quality up-facing and down-facing surfaces. Offering a good balance of properties between rigidity and functionality. Parts that mimic polypropylene. Ideal for master patterns in rubber molding applications.
EnvisionTEC RC Series are high-temperature resins for building tough and stiff parts at very high resolutions. Parts made with these materials are ideal for silicone molding, pump housings, blades, test parts for wind tunnels, light reflectors and various automotive applications. These materials are also perfect for high detail jewelry and animation applications and can be finished with a variety of methods including painting or plating.
With 20% powder wax content, WIC100 Series remains a popular value material in EnvisionTEC’s portfolio of castable materials. Delivers quality detail and printing speeds, along with a standard wax burnout cycle with regular gypsum investment.