PixCera Plus

Video Case Studies Quote

The PixCera Plus 3D Printer is designed to support Rapid Direct Manufacturing with a low-cost and high-resolution solution. The PixCera is a great machine for the small lab and can print up to 20 copings or crowns and up to 7-unit bridges in wax-based Press-E-Cast in under 2 hours. The wax parts are designed for speed investment casting, allowing for a fast one-hour burn-out cycle. With a small footprint, the PixCera Plus is economically designed to fit into a small area. It is office friendly and has a low power consumption. The PixCera Plus can operate unattended with maximum reliability. With the UV option, the PixCera Plus can also print E-Dent 3D printer materials for the direct production of FDA-approved temporaries.

Machine Properties

Build Envelope

60 x 45 x 80 mm (2.36 x 1.71 x 3.15 in.)

XY Resolution*

43 µm (0.0017 in.)

Dynamic Voxel Resolution in Z (material dependent)**

25 – 35 µm (0.0010 – 0.0014 in.)

Projector Resolution

1400 x 1050 pixels

Native Voxel Size

43 µm (0.0017 in.)

Data Handling

STL

Warranty

1 Year Included

System Properties
  • Easy handling through pre-adjusted material modules
  • Very few moving parts and minimal consumable components guarantee a strong and reliable system that is user serviceable.
  • Post-processing is clean and simple due to near 100% photo cure during the build process.
  • A choice of high-quality materials readily available.
  • Fully cured models are chemically safe.
  • Utilizes a built-in ethernet interface which connects the PixCera directly to a PC workstation or allows for integration into a network.
  • Material changeover can be done quickly and easily
  • Footprint (L x W x H): 45 x 78 x 45 cm (17.72 x 30.71 x 17.72 in.)
  • Weight: 35 kg (77.16 lbs)
Materials Available

Dental crown and bridge dental material.

A castable material specifically formulated for patterns with thin features and some flexibility, such as partial frameworks

A wax-filled photopolymer material to 3D print castable parts with extreme dimensional accuracy and exceptional surface finish.

A material developed specifically for the rapid production of highly accurate, scannable dental models

Orthodontic indirect bonding trays

Related Printers:

Vida Hi-Res Crown & Bridge

Das Crown&Bridge-Modell bietet die höchste Auflösung unter den Geräten der Vida-Serie und eignet sich daher ideal zur Herstellung extrem präziser Zahnkronen, Brücken und Stumpfkappen aus Guss- und Pressmaterial oder aus einem FDA-zertifizierten Material für Langzeitprovisorien.

Bauraum

90 x 50 x 100 mm (3.54 x 1.97 x 3.95 in.)

XY-Auflösung*

35 µm (0.0014 in.)

Primärmarkt

P4 DDP

Optimal einzusetzen in Dental Laboren. Die P4 DDP ermöglicht den Druck von 95 Kronen innerhalb von 2 Stunden.

Bauraum

115 x 72 x 180 or 230 mm (4.5 x 2.8 x 8.66 or 9.06 in.)

XY-Auflösung*

30 µm (0.0012 in.)

Primärmarkt

Materials Available for the PixCera Plus Printer

A material developed specifically for the rapid production of highly accurate, scannable dental models. Looks and feels similar to traditional gypsum models.

EnvisionTEC’s E-Dent 100 is a light-cured micro-hybrid filled dental crown and bridge dental material for long term temporaries. Provisionals are photo polymerized on a voxel-by-voxel basis (volumetric pixel) of the liquid resin.

E-IDB is a 3D printing material allowing for the production of indirect bonding trays for the precise placement and release of orthodontic brackets.

A castable material developed for a specific need in the dental industry: delivering delicate partial frameworks with thin features and some flexibility.

A wax-filled photopolymer material for the production of full anatomical crowns and bridges with extreme dimensional accuracy in X, Y and Z, as well as exceptional surface finish.