The EnvisionTEC line of Perfactory 3D printing materials are formulated for use with printers that use the Perfactory DLP® technology to grow exceptionally accurate and functional parts, without sacrificing speed of build time. We offer a wide range of materials with different qualities for our 3D printers, including castable resins that contain some wax for easy burn-out in investment castings. We also offer materials that are flexible, transparent and functional for a variety of uses.
Now available in beta, E-Tool 2.0 is filled with Barium Borosilicate Glass, known for its heat and chemical resistance, to deliver injection molds that can withstand high heat and pressure. Combined with EnvisionTEC’s 3D printing technologies, E-Tool 2.0 delivers highly accurate tooling with an exceptionally smooth surface finish.
E-RigidForm is a polyurethane-like resin that 3D prints strong, hard and stiff parts that can be used for prototypes and end use. Available in translucent amber, gray and black, E-RigidForm has high tensile strength (68-73 MPa) that compares with acrylic, nylon 6 and polycarbonate. It also delivers good heat deflection and water resistance. With a hardness value of Shore D 87, the same value as a cast urethane plastic, E-RigidForm is a versatile and tough material that is ideal for a wide range of industrial and consumer applications.
E-OrthoShape is a grey ABS-like material that prints in 100 micron layers. It is recommended for the affordable volume production of models on which to produce clear thermoformed aligners by orthodontic professionals.
A high wax content material that delivers crisp details and a smooth surface finish, along with the clean burnout that delivers foolproof casting with standard investments.
A popular production casting material, PIC 100 is ideal for printing jewelry, dental and other parts requiring exceptional detail and surface finish. In jewelry, PIC is recommended for pieces up to 5 grams finish weight, such as bridal jewelry.
A low-wax 3D printing material, EPIC delivers results similar to EnvisionTEC’s wax-free PIC material, but with 8% liquid wax for lower thermal expansion during burnout. Ideal for customers who require flexibility between large and small pieces and have expert-level quality control in casting.
A castable material with moderate levels of wax for 3D printing heavier jewelry pieces up to 20 grams finish weight.
This advanced engineering-grade material is a polyurethane-like material that produces a final material with soft Shore A values of 40 or 80 depending on your needs. E-Shore A is a material developed for end-use applications such as footwear, sporting goods, and other uses requiring durability, comfort and flexibility.
A wax-filled photopolymer material for the production of full anatomical crowns and bridges with extreme dimensional accuracy in X, Y and Z, as well as exceptional surface finish.
A castable material developed for a specific need in the dental industry: delivering delicate partial frameworks with thin features and some flexibility.
With 20% powder wax content, WIC100 Series remains a popular value material in EnvisionTEC’s portfolio of castable materials. Delivers quality detail and printing speeds, along with a standard wax burnout cycle with regular gypsum investment.
E-Rigid PU is a polyurethane-like resin that 3D prints end-use and prototype parts that compete with injection molded plastics. Available in black, natural and white, E-Rigid PU is hard and stiff but also maintains good strength, marked by flexibility and impact resistance. With a Shore D hardness values similar to the value as a cast urethane plastic, E-Rigid PU is a versatile and tough material.
EnvisionTEC's E-Denture material is an FDA-approved, biocompatible Class IIa material suitable for 3D-printing all types of denture bases.
EnvisionTEC’s E-Poxy is a partially biosourced, tough, dual-cure material that delivers strong, thin-walled final products. E-Poxy offers a good relationship between flexibility, hardness and heat resistance that is also ideal for connectors, among other objects.
EnvisionTEC’s E-CE is a stiff, heat-resistant, high-performance dual-cure material that also offers chemical resistance. It is perfect for industrial products that require thermal stability such as electronics encasements and under-the-hood parts.
E-Gum is used to create flexible gingival masks for use in combination with 3D printed dental models, simulating the flexibility of the patient's gum in order to adjust dental prostheses properly.
EnvisionTEC's E-Dent 400 printing material is an FDA-approved solution for the accurate 3D printing of crowns and bridges for long-term temporary use.
EnvisionTEC‘s ABS Flex White 3SP is an extremely flexible ABS-like 3D printing material for 3SP technology. ABS Flex White is an ideal solution for a wide variety of applications including snap-fit items and assembly applications which require some elasticity.
EnvisionTEC’s E-Glass 2.0 material is a transparent material for use on EnvisionTEC's 3D Printers. Featuring excellent surface finish quality and feature resolution, E-Glass 2.0 is an ideal 3D printing solution for simulating clear plastics.
E-IDB is a 3D printing material allowing for the production of indirect bonding trays for the precise placement and release of orthodontic brackets.
E-Model is a tough material, suitable for high quality prototypes of items in categories such as automotive and consumer goods as well as stable enough for production-quality end use parts. It is also the ideal material for dental and orthodontic models.
ABS Hi-Impact 3SP is a tough material, suitable for high quality prototypes of items in categories such as automotive and consumer goods as well as stable enough for production-quality end use parts.
EnvisionTEC‘s ABS Tough is an extremely tough ABS-like 3D printing material. ABS Tough is an ideal solution for a wide variety of applications including snap-fit items and assembly applications which require some elasticity.
EnvisionTEC’s E-Guide Tint is a biocompatible certified Class I material, developed for the production of high precision surgical drill guides for use in implant surgery. The results produced by combining E-Guide Tint with EnvisionTEC technology are superior to traditional methods of manufacturing implant placement guides.
A material developed specifically for the rapid production of highly accurate, scannable dental models. Looks and feels similar to traditional gypsum models.
EnvisionTEC’s E-Dent 100 is a light-cured micro-hybrid filled dental crown and bridge dental material for long term temporaries. Provisionals are photo polymerized on a voxel-by-voxel basis (volumetric pixel) of the liquid resin.
E-Guard is a biocompatible transparent material for the production of accurate bite splints and night guards on the Perfactory® line of 3D Printers. The results produced by combining E-Guard with EnvisionTEC technology are superior to traditional methods of manufacturing bite guards and night guards. It is a clear material, allowing for maximum visibility.
EnvisionTEC’s E-Shell 200 Series 3D Printer Material is a low viscosity liquid photopolymer that produces strong, tough, water-resistant ABS like parts with high detail that are Class IIa biocompatible according to ISO 10993/Medical Product Law and are CE certified for use as hearing aid products, otoplastics, and medical devices.
The E-Shell 300 3D Printer Material series has been designed especially for applications in the hearing aid industries and is distinguished for rigidity and durability. It is CE certified and Class-IIa biocompatible according to ISO 10993 (Medical Product Law) for hearing aid shells and otoplastics.
The EnvisionTEC E-Clear series is a liquid photopolymer that produces strong, tough, water-resistant parts especially for applications in the custom hearing device market.
The EnvisionTEC E-Shell 500 series has been designed especially for applications in the Hearing Aid industries and is distinguished for soft durability.
The EnvisionTEC E-Shell 600 series has been designed especially for applications in the Hearing Aid industries and is distinguished for soft durability. The material is used on Perfactory UV machines only. EnvisionTEC E-Shell 600 is a liquid, photo-reactive acrylate for building functional parts. It is CE certified and Class-IIa biocompatible according to ISO 10993 (Medical Product Law) for soft ear shells and tips.
The E-Shell 3000 3D Printer Material series has been designed especially for applications in the hearing aid industries and is distinguished for rigidity and durability. It is CE certified and Class-IIa biocompatible according to ISO 10993 (Medical Product Law) for hearing aid shells and otoplastics.
E-Silicone offers a solution to produce silicone otoplastics by additive manufacture of cocoon molds.
High temperature molding material for non-metal masters dramatically changes 3D printing capabilities for manufacturers. With a heat deflection temperature of 140°C straight out of the machine, high definition parts printed in HTM140 can be directly vulcanized in rubber, eliminating the need for a metal master.
The latest breakthrough in extremely durable photopolymers for use in producing very accurate parts with high feature detail on EnvisionTEC’s 3D printers. With added stability and surface quality, this material produces parts with high impact resistance similar to thermoplastics.
High temperature resistance and excellent surface finish. A ceramic filled photopolymer that produces highly detailed parts with crisp features. Photosilver´s high temperature resistance allows for the production of vulcanized rubber molds without breaking or melting the master pattern.
EnvisionTEC’s quick building QView resin is ideal for providing fast design verification models. This exciting new material is capable of impressive print speeds for the full build envelope. This allows designers to put their custom design pieces into their customers’ hands in record time for final fit and design verification. It can also be used as a pattern when built in high resolution to make a silicone mold.
R5 3D printing material is a liquid photopolymer that produces robust, accurate, and functional parts. Exhibits superior fatigue properties, strong memory retention, and high quality up-facing and down-facing surfaces. Offering a good balance of properties between rigidity and functionality. Parts that mimic polypropylene. Ideal for master patterns in rubber molding applications.
R11 3D printing material is a liquid photopolymer that produces robust, accurate, and functional parts. Exhibits superior fatigue properties, strong memory retention, and high quality up-facing and down-facing surfaces. Offering a good balance of properties between rigidity and functionality. Parts that mimic polypropylene. Ideal for master patterns in rubber molding applications.
Accurate and functional resin for producing robust and durable parts. Pro Gray 3D Printer Material is a liquid, photo-reactive acrylate with a wide processing latitude, which is used to produce parts with high quality up-facing and down-facing surfaces.
A popular line of photosensitive resins that contain ceramic particles, EnvisionTEC's RC materials build tough and stiff parts at very high resolutions. Parts made with these materials are also resistant to high temperatures and are ideal for silicone molding, pump housings, blades, test parts for wind tunnels, light reflectors and various automotive applications. These materials are also perfect for high detail jewelry and animation applications and can be finished with a variety of methods including painting or plating.