E-Dent 100 M

EnvisionTEC’s E-Dent 100 M is a light-cured micro-hybrid filled dental crown and bridge material for long term temporaries for use on the Vida Hi-Res machine. Provisionals are photo polymerized on a voxel-by-voxel basis (volumetric pixel) of the liquid resin. E-Dent 100 M can also be used for printing of very tough veneers that are extremely accurate with a very fine surface finish. E-Dent 100 M is currently available in 3 shades A1, A2 and A3. Structures can be cut back and then layered using any light-curable shade composite. It is FDA approved. EnvisionTEC’s E-Dent 100 M has been developed especially for the manufacturing of long term crown and bridge provisional. Full crowns or multi unit bridges can be printed.

Physical Properties

Filler content by weight in %


Filler content by volume in %


Vickers hardness

25 HV

Flexural Strength

> 90 N/mm2

Modulus of Elasticity

> 4400 N/mm2

Tensile Strength

30 N/mm2

Compressive Strength

> 250 N/mm2

Water Absorption

18.1 μm/mm3

Recommended Machines