• E-Denture


EnvisionTEC’s E-Denture material for the Perfactory family of 3D printers is an FDA-approved, biocompatible Class IIa material suitable for printing all types of denture bases.  This material has low shrinkage compared to standard PMMA denture base materials, which results in excellent fitting denture bases.  This 3D-printed solution allows for a natural looking appliance with exceptional customized fit.

Limited availability in North America Q3 2017.

Physical Properties

Brookfield viscosity at 23°C

1.0 – 1.5 Pa s

Flexural strength

85 MPa

Flexural modulus

2.100 MPa

Water sorption

32 µg/mm3

Water solubility

1.6 µg/mm3

Residual monomer


Hardness shore D

80 – 90

Recommended Machines

Related Materials:

EnvisionTEC's E-Dent 400 printing material is an FDA-approved solution for the accurate 3D printing of crowns and bridges for long-term temporary use.

EnvisionTEC’s E-Dent 100 is a light-cured micro-hybrid filled dental crown and bridge dental material for long term temporaries. Provisionals are photo polymerized on a voxel-by-voxel basis (volumetric pixel) of the liquid resin.