E-Dent1000 is a biocompatible 3D printing material for use in producing high quality monolithic dentures and try-ins as well as outstanding fully digital dentures when fused with E-Denture Pro. The balance between inorganic fillers and the resin give the material its high strength and wear resistance. E-Dent 1000 is easy to finish and polish, and can be stained with all types of composite staining kits to blend perfectly a beautiful and natural aesthetic.
Colors Available: A1, A2, A3, A3.5, B1, and Bleach
Viscosity @ 30°C
660 cP
Shore D
89-90
Izod Notched Impact
20 J/m
Heat Deflection Temperature
58°C @ 1.82 MPa
Vickers Hardness
18 HV
Young's Modulus, Dry Material
1340 MPa
Young's Modulus, After Immersion in Water 2 Days -37°C
1330 MPa
Ultimate Strength, Dry Material
67.5 MPa
Ultimate Strength, After Immersion in Water 2 Days -37°C
68.9 MPa
Strain at Break, Dry Material
16%
Strain at Break, After Immersion in Water 2 Days -37°C
14%
Ultimate Flexural Strength, Dry Material
136 MPa
Ultimate Flexural Strength, After Immersion in Water 2 Days -37°C
120 MPa
Flexural Modulus, Dry Material
3660 MPa
Flexural Modulus, After Immersion in Water 2 Days -37°C
3300 MPa