EnvisionTEC’s Perfactory 4 Digital Dental Printer (DDP4) XL is a low cost, easy to maintain, and user-friendly 3D Rapid Manufacturing Systems for the digital dental laboratory. Using state of the art Direct Light Projection (DLP®) from Texas Instruments®, the DDP4 Systems produce the finest detail in the shortest amount of time.
192 x 120 x 180 or 230 mm (7.6 x 4.7 x 8.66 or 9.06 in.)
100 µm (0.004 in.)
Dynamic Voxel Resolution in Z (Material Dependent)
25 – 150 µm (0.0010 – 00060 in.)
Fixed Focal UV Lens
1920 x 1200 Pixels
Native Voxel Size
100 µm (0.004 in.)
Voxel Size With Optional Enhanced Resolution Module
50 µm (0.0020 in.)
1 Year Included
Strong, clear material with flexible capabilities
clear implant placement guides
for building partial dentures where some flex is required
highly accurate models with removable dies
Prototype and end-use model printing
Dental crown and bridge material
Orthodontic indirect bonding trays
Boasting the highest resolution available in the Vida Series, the C&B model is ideal for the production of extremely precise dental crowns, bridges, and copings in both a castable and pressable material or in an FDA-approved material for long-term temporaries.
The Vida Hi-Res is the perfect choice for small dental labs and practices who need a higher resolution 3D printing option. Crown and bridge models with removable dies, partial frameworks, and drill guides will all be produced with exceptional fit and surface finish.
Clear Guide is a crystal clear 3D printer material for the production of accurate drill guides. The results produced by combining Clear Guide with EnvisionTEC technology are superior to traditional methods of manufacturing implant placement guides. The clearest 3D printer material available on the market today allows for maximum visibility.
The peach color E-Denstone creates highly accurate models with removable dies similar to the standard gypsum color. The matte finish allows models to be scanned accurately for verification purposes and the high viscosity of the formula produces superior details and surface finish.
EnvisionTEC's E-Dent 400 printing material is an FDA-approved solution for the accurate 3D printing of crowns and bridges for long-term temporary use.
EnvisionTEC’s E-Glass 3SP material is a transparent material for use on the 3SP Series of 3D Printers. Featuring excellent surface finish quality and feature resolution, E-Glass 3SP is an ideal 3D printing solution for simulating clear plastics.
E-Gum is used to create flexible gingival masks for use in combination with 3D printed dental models, simulating the flexibility of the patient's gum in order to adjust dental prostheses properly.
E-IDB is a 3D printing material allowing for the production of indirect bonding trays for the precise placement and release of orthodontic brackets.
E-Model is a tough material, suitable for high quality prototypes of items in categories such as automotive and consumer goods as well as stable enough for production-quality end use parts. It is also the ideal material for dental and orthodontic models.
E-Partial material was developed for creating wax-like partial dentures for direct investment casting in semi precious metals. E-Partial material maintains flexural strength to ensure clasp flex without breakage. The stiffness of E-Partial allows for production of a very hard retention grid and super tight thin clasps to deliver a metal partial with the perfect fit every time.