EnvisionTEC’s Perfactory 3 DDP 3D Printer with optional ERM is a low-cost, easy maintenance, and user-friendly 3D Rapid Prototype Manufacuring System. Using state of the art Digital Light Processing® (DLP) technology from Texas Instruments®, the P3 DDP produces the finest detail in the shortest period of time to create 3D models that range from the conceptual to the fully functional.
84 x 63 x 230 mm (3.31 x 2.48 x 9.06 in.)
60 µm (0.0024 in.)
Dynamic Voxel Resolution in Z (Material Dependent)
15 – 150 µm (0.0006 – 0.006 in.)
Lens f = 60 mm (2.36 in.)
Native Voxel Size
60 µm (0.0024 in.)
Voxel Size With Optional Enhanced Resolution Module
30 µm (0.0012 in.)
Build Envelope With Increased Productivity Option
90 x 67.5 x 230 mm (3.59 x 2.66 x 9.06 in.)
ERM Voxel Size With Increased Productivity Option
32 µm (0.0013 in.)
1 Year Included
implant placement guides
3D printing of orthodontic models
Dental crown and bridge dental material.
transparent, for accurate bite and night guards
for building partial dentures where some flex is required
for producing wax copings, crowns and bridges
highly accurate models with removable dies
Prototype and end-use model printing
Dental crown and bridge material
Orthodontic indirect bonding trays
The P4 DDP XL offers the largest build area in the P4 DDP series, allowing for dental builds up to 4146 cubic cm (253 cubic in.) at a time. Large laboratories will appreciate the flexibility to produce surgical drill guides, dental and orthodontic models, partial frameworks and night guards all on the same versatile machine, with minimal time and effort required to change over between materials and applications.
Boasting the highest resolution available in the Vida Series, the HD C&B model is ideal for the production of extremely precise dental crowns, bridges, and copings in both a castable and pressable material or in an FDA-approved material for long-term temporaries.
Specially designed nano-filled 3D printing material that works reliably with both polyvinyl alcohol based separators and tin foil substitute for a “salt and pepper” technique of producing an orthodontic appliance.
The peach color E-Denstone creates highly accurate models with removable dies similar to the standard gypsum color. The matte finish allows models to be scanned accurately for verification purposes and the high viscosity of the formula produces superior details and surface finish.
EnvisionTEC’s E-Dent 100 is a light-cured micro-hybrid filled dental crown and bridge dental material for long term temporaries built on the Perfactory High Productivity DDP machine. Provisionals are photo polymerized on a voxel-by-voxel basis (volumetric pixel) of the liquid resin.
EnvisionTEC's E-Dent 400 printing material is an FDA-approved solution for the accurate 3D printing of crowns and bridges for long-term temporary use.
E-Guard is a biocompatible transparent material for the production of accurate bite splints and night guards on the Perfactory® line of 3D Printers. The results produced by combining E-Guard with EnvisionTEC technology are superior to traditional methods of manufacturing bite guards and night guards. It is a clear material, allowing for maximum visibility.
EnvisionTEC’s E-Guide Tint is a biocompatible certified Class I material, developed for the production of high precision surgical drill guides for use in implant surgery. The results produced by combining E-Guide Tint with EnvisionTEC technology are superior to traditional methods of manufacturing implant placement guides.
E-Gum is used to create flexible gingival masks for use in combination with 3D printed dental models, simulating the flexibility of the patient's gum in order to adjust dental prostheses properly.
E-IDB is a 3D printing material allowing for the production of indirect bonding trays for the precise placement and release of orthodontic brackets.
E-Model is a tough material, suitable for high quality prototypes of items in categories such as automotive and consumer goods as well as stable enough for production-quality end use parts. It is also the ideal material for dental and orthodontic models.
E-Partial material was developed for creating wax-like partial dentures for direct investment casting in semi precious metals. E-Partial material maintains flexural strength to ensure clasp flex without breakage. The stiffness of E-Partial allows for production of a very hard retention grid and super tight thin clasps to deliver a metal partial with the perfect fit every time.
A 3D printing photopolymer designed for producing wax copings, crowns and bridges up to 16 units. The material has a very low thermal expansion, which eliminates cracking of investment and produces a porous free material with a perfect margin fit. It can also be used for press on ceramic.