Vector 3SP Ortho


EnvisionTEC’s Vector 3SP Ortho 3D printer allows for the production of large quantities of orthodontic models at fast build speeds without sacrificing the surface quality and part accuracy that EnvisionTEC is known for.  The Vector 3SP Ortho uses EnvisionTEC;s patented 3SP (Scan, Spin, and Selectively Photocure) technology to quickly 3D print highly accurate orthodontic models.

The Vector 3SP Ortho is delivered and installed with all the relevant software to enable automatic generation of supports and perfect model production.  The surface quality of the printed models shows no signs of stairstepping on the inner and outer surfaces.  The Vector 3SP Ortho includes a generous build envelope and speed capabilities that make it an attractive solution for orthodontic model production in either a lab or a practice setting.

Machine Properties

Build Envelope

300 x 200 x 70 mm (11.8 x 7.9 x 2.8 in.)

XY Resolution*

100 µm (0.004 in.)

Dynamic Voxel Resolution in Z (Material Dependent)

50 – 100 µm (0.002 – 0.004 in.)

Data Handling



1 year included

System Properties
  • A single material is used for both build and easily removable, partially cured perforated supports
  • Very few moving parts make the system user serviceable
  • Low part cost due to minimal material waste
  • Can connect directly to a PC workstation or be integrated into a network for pre-processing of the job files and for remote monitoring
  • The system has a stand-alone PC with a 22” touchscreen monitor
  • Footprint (L x W x H): 29” x 30” x 46” (74 x 76 x 117 cm)
  • Weight: 192 kg (423 lbs)


Materials Available

Prototype and end-use model printing



Related Printers:

Xede 3SP Ortho

High-volume orthodontic practices and labs will appreciate the generous build space available on the Xede 3SP Ortho, allowing for up to 49 appliance models or 77 aligner models to be produced in each job.

Build Envelope

457 x 457 x 102 mm (18 x 18 x 4 in.)

XY Resolution•

100 µm (0.004 in.)

Primary Markets

Ultra 3SP Ortho

The ULTRA 3SP Ortho can be used by both labs and orthodontic practices to produce up to 18 high-quality aligner models or 12 appliance models in each build.

Build Envelope

266 x 175 x 76.2 mm (10.5 x 6.9 x 3 in.)

XY Resolution*

100 µm (0.004 in.)

Primary Markets

Materials Available for the Vector 3SP Ortho Printer

E-Model Light DLP printing material for DLP and cDLM 3D printers is the perfect choice for a wide variety of high-accuracy dental modeling needs.