The Perfactory Vida Hi-Res is a low cost, high resolution, easy to maintain and user friendly 3D printer for the digital dental laboratory. The Vida Hi-Res boasts a high resolution projector running at 1920 x 1080 pixel resolution with custom UV optics. Once the print job is preprocessed on a computer housing the Perfactory software suite, it is transferred to the machine via Ethernet or USB and can run independently without the need for continuous connection to the preprocessing computer. The surface quality of the printed models allows for production with no signs of stairstepping, unlike the visibility when using competing technologies. The 50 µm (0.002 in.) resolution of the Perfactory Vida Hi-Res allows dental labs and practices to produce high quality crown and bridge restoration work including models with removable dies, crown, inlays and onlays, crowns, bridges and veneers for the fabrication of indirect restorations using a casting or pressing method.
96 x 54 x 100 mm (3.78 x 2.13 x 3.94 in.)
50 µm (0.002 in.)
Dynamic Resolution in Z (material dependent)
50 to 150 µm (0.001 to 0.006 in.
Industrial UV LED
1 year back to factory including parts and labor
Boasting the highest resolution available in the Vida Series, the C&B model is ideal for the production of extremely precise dental crowns, bridges, and copings in both a castable and pressable material or in an FDA-approved material for long-term temporaries.
EnvisionTEC’s E-Dent 100 is a light-cured micro-hybrid filled dental crown and bridge dental material for long term temporaries built on the Perfactory High Productivity DDP machine. Provisionals are photo polymerized on a voxel-by-voxel basis (volumetric pixel) of the liquid resin.
EnvisionTEC's E-Dent 400 printing material is an FDA-approved solution for the accurate 3D printing of crowns and bridges for long-term temporary use.
E-Gum is used to create flexible gingival masks for use in combination with 3D printed dental models, simulating the flexibility of the patient's gum in order to adjust dental prostheses properly.
E-Model is a tough material, suitable for high quality prototypes of items in categories such as automotive and consumer goods as well as stable enough for production-quality end use parts. It is also the ideal material for dental and orthodontic models.
A wax 3D printer photopolymer designed for producing wax copings, crowns and bridges up to 16 units. The material has a very low thermal expansion, which eliminates cracking of investment and produces a porous free material with a perfect margin fit. It can also be used for press on ceramic.