The Vida HD Crown & Bridge (C&B) is a low cost, high resolution, easy to maintain and user-friendly 3D printer for the digital dental laboratory.
The Vida HD C&B boasts a high-resolution projector running at 1920 x 1080 pixel resolution with custom UV optics, specially optimized for crown and bridge materials. Once the print job is preprocessed on a computer housing the Perfactory software suite, it is transferred to the machine via Ethernet or USB and can run independently without the need for continuous connection to the preprocessing computer.
The surface quality of the printed models allows for production with no signs of stairstepping, unlike the visibility when using competing technologies. The 35 µm (0.0014 in.)resolution of the Vida HD C&B allows dental labs and practices to produce high-quality crown and bridge restoration work including inlays and onlays, crowns, bridges and veneers for the fabrication of indirect restorations using a casting or pressing method.
90 x 50 x 100 mm (3.54 x 1.97 x 3.95 in.)
35 µm (0.0014 in.)
Dynamic Resolution in Z (material dependent)
25 to 150 µm (0.001 to 0.006 in.)
Industrial UV LED
1 year back to factory including parts and labor
Dental crown and bridge dental material.
A castable material specifically formulated for patterns with thin features and some flexibility, such as partial frameworks
A popular casting material, PIC 100 is ideal for printing jewelry, dental and other parts requiring exceptional detail and surface finish
A wax-filled photopolymer material to 3D print castable parts with extreme dimensional accuracy and exceptional surface finish.
A material developed specifically for the rapid production of highly accurate, scannable dental models
Ceramic-filled material for 3D printing very high resolution parts that are also tough and stiff
Dental denture, crown and bridge material
Creates flexible gingival masks for use in combination with 3D printed dental models.
A material developed specifically for the rapid production of highly accurate, scannable dental models. Looks and feels similar to traditional gypsum models.
EnvisionTEC's E-Dent 400 MFH printing material is an FDA-approved solution for the accurate 3D printing of crowns and bridges for long-term temporary use as well as dentures.
E-Gum is used to create flexible gingival masks for use in combination with 3D printed dental models, simulating the flexibility of the patient's gum in order to adjust dental prostheses properly.
A castable material developed for a specific need in the dental industry: delivering delicate partial frameworks with thin features and some flexibility.
A popular production casting material, PIC 100 is ideal for printing jewelry, dental and other parts requiring exceptional detail and surface finish. In jewelry, PIC is recommended for pieces up to 5 grams finish weight, such as bridal jewelry.
A wax-filled photopolymer material for the production of full anatomical crowns and bridges with extreme dimensional accuracy in X, Y and Z, as well as exceptional surface finish.
A popular line of photosensitive resins that contain ceramic particles, EnvisionTEC's RC materials build tough and stiff parts at very high resolutions. Parts made with these materials are also resistant to high temperatures and are ideal for silicone molding, pump housings, blades, test parts for wind tunnels, light reflectors and various automotive applications. These materials are also perfect for high detail jewelry and animation applications and can be finished with a variety of methods including painting or plating.