The Micro Plus Hi-Res can produce small, premium components requiring a high level of precision, making it perfect for designers, shops and small jewelry businesses. It is able to build 5-6 average-sized rings in a single build with excellent detail and surface finish.
45 x 28 x 100 mm (1.77 x 1.10 x 3.94 in.)
30 μm (0.0012 in.)
Dynamic Voxel Resolution in Z (Material dependent)
25 – 75 µm (0.001 – 0.003 in.)
Industrial UV LED
1 year back to factory including parts and labor
Flexible, holding high stress and force
extremely tough ABS-like 3D printing material
3D printing for the jewelry manufacturing market
Easily cast any injection wax pattern.
for direct investment casting of products for the jewelry market
for quick 3D print molds for thermoplastic injection molding
extremely durable for use in high accuracy parts
High temperature molding material for non-metal masters
direct investment casting for the Jewelry market
fast design verification models
The P3 Mini Multi Lens is a customizable production tool capable of resolutions down to an incredible 16 microns. This high precision produces the finest detail with constant high build speeds. With a choice of three lens configurations, additional lenses can also be purchased, adding to the versatility of this 3D printer.
The Aureus Plus is the perfect choice for small to medium sized jewelry companies to enable full production requirements. It is capable of building 8-12 pieces and the newly enhanced speed capabilities will allow for multiple builds each day in 43 µm (0.0017 in.) resolution.
The Otoflash is a light polymerization chamber for the hardening/curing of light curing resins for jewelry, dental, and otoplastic applications. Two photoflash lamps at the bottom of the curing chamber operate in a work mode with a frequency of 10 flashes per second. The photo-flash lamps produce a very intensive light radiation in a spectrum from 300 up to 700 nm. Because of this intensive light radiation, a better hardening of the materials is possible, resulting in materials with good physical values and reduced content of residual monomer versus using other lamp types with a different light emitting spectrum.
EnvisionTEC‘s ABS Flex M Series is an extremely flexible ABS-like 3D printing material for Perfactory® Micro technology. ABS Flex M Series is an ideal solution for a wide variety of applications including snap-fit items and assembly applications which require some elasticity.
EnvisionTEC‘s ABS Tough M is an extremely tough ABS-like 3D printing material. ABS Tough M is an ideal solution for a wide variety of applications including snap-fit items and assembly applications which require some elasticity.
EnvisionTEC’s E-Model Flex is a highly accurate molding and final-use material with improved elongation at break. This material has high stability, with low shrinkage and low curling.
EnvisionTEC’s E-Tool M material allows manufacturers to 3D print molds for thermoplastic injection molding quickly and efficiently. It is ideal for low volume production runs or for the creation of multiple iterations of a mold during the prototyping phase.
EnvisionTEC’s innovative new direct investment casting material, Easy-Cast EC3000 M for use on the Perfactory® 3D printers. This easy to cast material has 3 times more wax than any polymer based material, including EC500. It does not boil during burnout, a leading cause of porosity during casting among competitive products.
Direct investment casting just got easier. EnvisionTEC’s innovative direct investment casting material, Easy Cast EC500 M for use on the Micro HiRes jewelry model makers. With 30% faster build times and dramatically improved casting abilities, EC500 M is the answer you have been waiting for to give you a competitive advantage in the jewelry manufacturing market.
Parts made using EnvisionTEC EPIC M resin evaporate at moderate burn out temperatures without reacting with your investment and offers an extremely low thermal expansion. It is optimally suitable for producing precious metal castings and builds extremely smooth surfaces.
High temperature molding material for non-metal masters dramatically changes 3D printing capabilities for manufacturers. With a heat deflection temperature of 140°C straight out of the machine, high definition parts printed in HTM140 M can be directly vulcanized in rubber, eliminating the need for a metal master.
The latest breakthrough in extremely durable photopolymers for use in producing very accurate parts with high feature detail on EnvisionTEC’s 3D printers. With added stability and surface quality, this material produces parts with high impact resistance similar to thermoplastics.
Parts made using EnvisionTEC PIC100 M resin evaporate at moderate burn out temperatures without reacting with your investment and offers an extremely low thermal expansion. It is optimally suitable for producing precious metal castings and builds extremely smooth surfaces.
Quick building QView M resin is ideal for providing fast design verification models. This exciting new material is capable of impressive print speeds of up to an inch per hour for the full build envelope. This allows designers to put their custom design pieces into their customers’ hands in record time for final fit and design verification.