• desktop-digital-dental-printer-plus

Desktop Digital Dental Printer Plus

Video Case Studies Quote

EnvisionTEC’s Perfactory Desktop Digital Dental Printer (DDDP) Plus is a low cost, easy to maintain and user- friendly 3D Rapid Manufacturing Systems for the digital dental laboratory.

Using state-of-the-art Direct Light Projection (DLP®) technology from Texas Instruments®, the DDDP Plus System produces the finest detail in the shortest amount of time.

Machine Properties

Build Envelope

100 x 75 x 80 mm (3.94 x 2.95 x 3.15 in.)

XY Resolution*

71 µm (0.003 in.)

Dynamic Voxel Resolution in Z (material dependent)

25 to 150 µm (0.001 to 0.006 in.)

Projector Resolution

1400 x 1050 pixels

Native Voxel Size

71 µm (0.003 in.)

Light Spectrum

Visible or UV options

Data Handling

STL

Warranty

1 Year Included

System Properties
  • Any STL file from an impression scanner or intra-oral scanner can be printed.
  • Capable of printing models, quads, partial frameworks, and long-term temporaries.
  • Utilizing a built in ethernet interface, can connect directly to a PC workstation or be integrated into a network
  • Changeover between materials is quick and easy
  • Footprint (L x W x H): 45 x 78 x 45 cm (17.72 x 30.71 x 17.72 in.)
  • Weight: Weight: 35 kg (77.16 lbs)

 

Materials Available

clear implant placement guides

3D printing of orthodontic models

Dental crown and bridge dental material.

transparent, for accurate bite and night guards

for building partial dentures where some flex is required

highly accurate models with removable dies

Prototype and end-use model printing

Dental crown and bridge material

Orthodontic indirect bonding trays

Applications

Related Printers:

P4 DDP

An excellent dental laboratory staple, the P4 DDP can print up to 95 copings and crowns in less than two hours. It is also capable of printing long-term temporaries, partials, and full arch or quad models.

Build Envelope

115 x 72 x 180 or 230 mm (4.5 x 2.8 x 8.66 or 9.06 in.)

XY Resolution*

60 µm (0.0024 in.)

Primary Markets

Vida Hi-Res

The Vida Hi-Res is the perfect choice for small dental labs and practices who need a higher resolution 3D printing option. Crown and bridge models with removable dies, partial frameworks, and drill guides will all be produced with exceptional fit and surface finish.

Build Envelope

96 x 54 x 100 mm (3.78 x 2.13 x 3.94 in.)

XY Resolution*

50 µm (0.002 in.)

Primary Markets

Materials Available for the Desktop Digital Dental Printer Plus Printer

Clear Guide is a crystal clear 3D printer material for the production of accurate drill guides. The results produced by combining Clear Guide with EnvisionTEC technology are superior to traditional methods of manufacturing implant placement guides. The clearest 3D printer material available on the market today allows for maximum visibility.

i2i10

Specially designed nano-filled 3D printing material that works reliably with both polyvinyl alcohol based separators and tin foil substitute for a “salt and pepper” technique of producing an orthodontic appliance.

i2i10iw-o

The peach color E-Denstone creates highly accurate models with removable dies similar to the standard gypsum color. The matte finish allows models to be scanned accurately for verification purposes and the high viscosity of the formula produces superior details and surface finish.

i2iw-o

EnvisionTEC’s E-Dent 100 is a light-cured micro-hybrid filled dental crown and bridge dental material for long term temporaries built on the Perfactory High Productivity DDP machine. Provisionals are photo polymerized on a voxel-by-voxel basis (volumetric pixel) of the liquid resin.

i2

EnvisionTEC's E-Dent 400 printing material is an FDA-approved solution for the accurate 3D printing of crowns and bridges for long-term temporary use.

i2

E-Guard is a biocompatible transparent material for the production of accurate bite splints and night guards on the Perfactory® line of 3D Printers. The results produced by combining E-Guard with EnvisionTEC technology are superior to traditional methods of manufacturing bite guards and night guards. It is a clear material, allowing for maximum visibility.

i2

E-Gum is used to create flexible gingival masks for use in combination with 3D printed dental models, simulating the flexibility of the patient's gum in order to adjust dental prostheses properly.

i2iw-o

E-IDB is a 3D printing material allowing for the production of indirect bonding trays for the precise placement and release of orthodontic brackets.

i2iw-o

E-Model is a tough material, suitable for high quality prototypes of items in categories such as automotive and consumer goods as well as stable enough for production-quality end use parts. It is also the ideal material for dental and orthodontic models.

i1i9i2i3i4i5

E-Partial material was developed for creating wax-like partial dentures for direct investment casting in semi precious metals. E-Partial material maintains flexural strength to ensure clasp flex without breakage. The stiffness of E-Partial allows for production of a very hard retention grid and super tight thin clasps to deliver a metal partial with the perfect fit every time.

i2