Created by one of the most experienced teams of engineers in 3D printing, the Envision One cDLM is the largest, most advanced desktop 3D printer ever created. It is bigger, faster, easier to use and more innovative than all the other 3D printers on the market.
Designed to take you from beginner to expert in a single machine, the Envision One cDLM is the only professional 3D printer you’ll ever need. EnvisionTEC delivers an end to end solution including design software parameter optimization to deliver accurate parts every time with minimal supports.
Perfect for a wide variety of 3D printing applications, the Envision One cDLM is capable of printing up to 45 mm/hour, material dependant.
180 x 101 x 175 mm (7.09 x 3.98 x 6.9 in.)
XL Version also available
180 x 101 x 330 mm (7.09 x 3.98 x 13 in.)
Up to 45 mm/hour, material dependent
Native XY Resolution
XY Resolution with Contour Gray Scaling
Dynamic Z Resolution
50 µm to 150 µm, material dependent
1 Year back to factory included
• Layerless technology delivers super smooth models.
• 75% less supports compared to regular DLP printers.
• Domeless technology delivers the highest accuracy in Z.
• High-resolution industrial projector with UV glass.
• LED light source at 385nm wavelength for higher accuracy on clear parts and crisper details across all parts.
• Dual linear slides provide superior stability during build process, eliminating any shifting in parts.
Flexible, holding high stress and force
Polyurethane-like resin that 3D prints end-use and prototype parts that compete with injection molded plastics
A groundbreaking material that produces strong, hard and stiff parts for prototypes and end use.
3D Printing material for injection molding
Elastomeric material for 3D Printing
Designed to take you from beginner to expert in a single machine, the Envision One cDLM is the only professional 3D printer you’ll ever need. EnvisionTEC delivers an end-to-end solution including design software parameter optimization to deliver accurate parts every time with minimal supports.
The Vida cDLM delivers outstanding surface quality with no signs of stairstepping. With the largest build envelope available in cDLM technology, the Vida cDLM allows for high quality results from a manufacturer with more than 15 years of experience in 3D printing technologies.
The Micro Plus cDLM’s patented technology allows for incredibly fast build speeds without sacrificing resolution or quality. Using a continuous motion of the build plate in the Z direction, prints can be completed in minutes rather than hours and still maintain 1 µm (0.00004 in.) accuracy in the Z direction.
Polypropylene-based material with high impact and compression strength with greater than 100% elongation at break. Ideal for fixtures and tooling.
EnvisionTEC‘s E-ABS Tough is an extremely tough ABS-like 3D printing material. E-ABS Tough is an ideal solution for a wide variety of applications including snap-fit items and assembly applications which require some elasticity.
E-Aquasol is a water-soluble 3D printing resin, allowsing industrial manufacturers to shell-cast thin-walled parts with high feature resolution.
Stiffness combined with toughness make this material ideal for use in a wide variety of impact-resistant medical devices.
EnvisionTEC’s E-Mould provides a new solution for injection molding with a validated process chain.
E-Rigid PU is a polyurethane-like resin that 3D prints end-use and prototype parts that compete with injection molded plastics. Available in black, natural and white, E-Rigid PU is hard and stiff but also maintains good strength, marked by flexibility and impact resistance. With a Shore D hardness values similar to the value as a cast urethane plastic, E-Rigid PU is a versatile and tough material. It is also an excellent solution for 3D printing dental diagnostic waxups.
E-RigidForm is a polyurethane-like resin that 3D prints strong, hard and stiff parts that can be used for prototypes and end use. Available in translucent amber, gray and black, E-RigidForm has high tensile strength (68-73 MPa) that compares with acrylic, nylon 6 and polycarbonate. It also delivers good heat deflection and water resistance. With a hardness value of Shore D 87, the same value as a cast urethane plastic, E-RigidForm is a versatile and tough material that is ideal for a wide range of industrial and consumer applications.
High flexural modulus and strength in a hydrophobic material that produces super tough parts, with nearly 4x the impact resistance as most engineering plastics.
A semi-translucent silicone, E-UA40 has good tear strength and excellent energy rebound. It is also good for general purpose elastomer parts such as robotic grippers.
A semi-translucent silicone, E-UA90 is a good for general purpose elastomer parts such as robotic grippers.
Loctite E-3840 is low viscosity, one-component light-cure acrylic resin used for prototyping via digital light processing (DLP) or Continuous Digital Light Manufacturing (cDLM). It cures with short exposure times which results in fast print speeds and provides very high print resolution which is ideal for parts that require fine features.
Loctite E-3843 is a black resin that may be used for prototyping or functional parts production. It offers good Impact resistance and thermal stability making it suitable for many demanding Engineering applications.
Loctite E-3860 is a black colored light curing acrylic resin that may be used for functional prototyping. It cures with a very short exposure to monochromatic light sources such as LED. Printed articles made from E-3860 exhibit high heat deflection temperature (HDT) and good print resolution.
Loctite E-5015 is a one-component, light-cure silicone resin with high durability and flexibility. It offers high resolution printing of shore A70 silicone with good print-speeds.
Loctite E-IND402 is an elastomeric UV photocurable resin that exhibits high resilience while maintaining excellent tensile strength. It is a single component system with excellent green strength and does not require thermal post processing.