EnvisionTEC’s patented new breakthrough technology, Continuous Digital Light Manufacturing, allows jewelers to 3D print models for direct investment casting in minutes rather than hours. The Micro Plus cDLM relies on continuous motion of the build plate in the Z direction to provide exceptionally fast builds and breathtaking resolution for castable models in EnvisionTEC’s industry standard casting material, PIC 100. The Micro Plus cDLM will also print even faster in QView, a design verification material, for fit and design models ready to show to a customer in minutes. Time is money, and with average build speeds ranging between 10 and 20 minutes per inch in Z for the full envelope, the results will allow bridal and fashion rings to be designed, grown, and ready for investment casting the same day.
45 x 28 x 75 mm (1.8 x 1.1 x 2.95 in.)
Pixel Size in X
39.8 µm (0.002 in.)
Pixel Size in Y
31.25 µm (0.001 in.)
Dynamic Resolution in Z (material dependent)
0.0006” to 0.006” (15μm to 150 μm)
Industrial UV LED
1 year back to factory including parts and labor
A biocompatible crystal clear material for accurate bite and night guards
A low-wax 3D printing material ideal for professional retail and jewelry customers who require flexibility between large and small pieces
A popular casting material, PIC 100 is ideal for printing jewelry, dental and other parts requiring exceptional detail and surface finish
Super-fast printing material for quick design verification models
Prototype and end-use model printing
Dental crown and bridge material
A breakthrough material for the high-speed printing of a castable photopolymer with the highest wax content available in 3D printing
A biocompatible material for direct 3D printing of pink denture bases
robust, accurate, and functional parts
A biocompatible material for precision surgical drill guides used in surgery
3D Printing material for injection molding
E-Guard is a biocompatible transparent material for the production of accurate orthodontic bite splints and night guards. The results produced by combining E-Guard with EnvisionTEC technology are superior to traditional methods of manufacturing bite guards and night guards. It is a clear material, allowing for maximum visibility.
EnvisionTEC’s E-Guide is a biocompatible certified Class I material, developed for the production of high precision surgical drill guides for use in implant surgery. The results produced by combining E-Guide with EnvisionTEC technology are superior to traditional methods of manufacturing implant placement guides.
E-Model Light DLP printing material for DLP and cDLM 3D printers is the perfect choice for a wide variety of high-accuracy dental modeling needs.
EnvisionTEC’s E-Mould provides a new solution for injection molding with a validated process chain.
A semi-translucent silicone, E-UA90 is a good for general purpose elastomer parts such as robotic grippers.
A breakthrough material for the high-speed printing of a castable photopolymer with the highest wax content available in 3D printing.
A low-wax 3D printing material, EPIC delivers results similar to EnvisionTEC’s wax-free PIC material, but with 8% liquid wax for lower thermal expansion during burnout. Ideal for customers who require flexibility between large and small pieces and have expert-level quality control in casting.
NextDent C&B Micro Filled Hybrid is a biocompatible Class IIa material developed for crowns and bridges.
NextDent Denture 3D+ material is a biocompatible Class IIa material suitable for 3D-printing all types of denture bases.
A popular production casting material, PIC 100 is ideal for printing jewelry, dental and other parts requiring exceptional detail and surface finish. In jewelry, PIC is recommended for pieces up to 5 grams finish weight, such as bridal jewelry.
EnvisionTEC’s quick building QView resin is ideal for providing fast design verification models. This exciting new material is capable of impressive print speeds for the full build envelope. This allows designers to put their custom design pieces into their customers’ hands in record time for final fit and design verification. It can also be used as a pattern when built in high resolution to make a silicone mold.
R5-385 material is an update on the original R5 material, one of EnvisionTEC's earliest materials still in use around the world, re-engineered for optimal performance in 3D printers utilizing 385nm wavelength light sources.