EnvisionTEC sells a range of accessories for its 3D printers, including Power Protection Systems and Curing Stations. EnvisionTEC’s PPS devices are designed to protect printers from power outages and brownouts, but also fluctuations in voltage and other energy noise that can disrupt 3D print jobs. After a print job is complete, EnvisionTEC’s Curing solutions help to harden or cure parts.

Otoflash Post Curing Light Pulsing Unit

The Otoflash is a light polymerization chamber for the hardening/curing of light curing resins for jewelry, dental, and otoplastic applications. Two photoflash lamps at the bottom of the curing chamber operate in a work mode with a frequency of 10 flashes per second. The photo-flash lamps produce a very intensive light radiation in a spectrum from 300 up to 700 nm. Because of this intensive light radiation, a better hardening of the materials is possible, resulting in materials with good physical values and reduced content of residual monomer versus using other lamp types with a different light emitting spectrum.

Inner Chamber Dimensions

120 x 120 x 50 mm (4.72 x 4.72 x 1.97 in.)

Curing Chamber Access

Top Loading

PPS DLP

A wise investment to help protect high value 3D printers and their print jobs, the EnvisionTEC PPS DLP is designed to protect the Micro Plus and Vida families of 3D printers from voltage fluctuations, power outages and other noise issues and provide a consistent supply of energy.

Region

North America

Recommended 3D Printers

Micro Plus and Vida Families

UV Light Curing Box

The UV Light Curing Box for ULTRA 3SP and Xtreme 3SP is a UV light flood lamp for the post-processing of UV sensitive curing resins for industrial, dental, medical, and other applications.

Inner Chamber Dimensions

457 x 457 x 355 mm (18 x 18 x 14 in.)

Curing Chamber Access

Top Loading

PPS DLP EU

A wise investment to help protect high value 3D printers and their print jobs, the EnvisionTEC PPS DLP EU is designed to protect the Micro Plus and Vida families of 3D printers from voltage fluctuations, power outages and other noise issues and provide a consistent supply of energy.

Region

Global Except for North America

Recommended 3D Printers

Micro Plus and Vida Families

LED Post Curing Unit

The ideal companion for the smaller desktop 3D printing options, the LED Post Curing Unit is a light polymerization chamber for the hardening/curing of light curing resins for jewelry, dental and otoplastic applications.

Inner Chamber Dimensions

114 x 102 x 57 mm (4.5 x 4 x 2.25 in.)

Curing Chamber Access

Front Loading

Primary Markets

Contact Us


* Required
Close